Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WS-X6K-S2U-MSFC2

We purchased a used SUP Engine from a reseller and I am having issues getting the MSFC to work. We thought we were ordering a WS-X6K-S2U-MSFC2, but when doing a "sho ver" it comes up as WS-X6K-S2UA-2GE with an MSFC2A in it. The problem is everything I find that references an "MSFC2A" also references a SUP 32 Engine. My question is, will an MSFC2A work in a SUP2 Engine? Also, I cannot find anything on a "WS-X6K-S2UA-2GE" module. What is the deal? Any help would be greatly appreciated!

WS-C6509 Software, Version NmpSW: 7.6(10)

Copyright (c) 1995-2004 by Cisco Systems

NMP S/W compiled on Oct 27 2004, 17:59:09

System Bootstrap Version: 7.4(0.4)

System Boot Image File is 'bootflash:cat6000-sup2k8.7-6-10.bin'

System Configuration register is 0x2

Hardware Version: 2.0 Model: WS-C6509 Serial #: SCA0329025J

PS1 Module: WS-CAC-1300W Serial #: ACP03351579

PS2 Module: WS-CAC-1300W Serial #: ACP03270225

Mod Port Model Serial # Versions

--- ---- ------------------- ----------- --------------------------------------

1 2 WS-X6K-S2UA-2GE SAD061000JF Hw : 0.102

Fw : 7.4(0.4)

Fw1: 6.1(3)

Sw : 7.6(10)

Sw1: 7.6(10)

WS-F6K-PFC2A SAD060600KG Hw : 0.101

Sw :

WS-X6K-S2UA-2GE SAD061000JF Hw : 0.102

Sw :

2 8 WS-X6408-GBIC SAD03295485 Hw : 2.3

Fw : 4.2(0.24)VAI78

Sw : 7.6(10)

3 48 WS-X6248-RJ-45 SAD040105XV Hw : 1.1

Fw : 4.2(0.24)VAI78

Sw : 7.6(10)

9 2 WS-X6380-NAM SAD052009KH Hw : 1.3

Fw : 4B4LZ0XA

Fw1: 5.4(2)

Sw : 3.1(1a)

Sw1: 7.6(10)

15 1 WS-F6K-MSFC2A SAD061404HT Hw : 0.101

Fw : 12.1(22)E2

Sw : 12.1(22)E2

DRAM FLASH NVRAM

Module Total Used Free Total Used Free Total Used Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1 524288K 70630K 191514K 32768K 9034K 23734K 512K 377K 135K

2 REPLIES
Cisco Employee

Re: WS-X6K-S2U-MSFC2

Hi Ethan,

This is very strange, and something is not quite right.

Could you email me directly regarding this?

bobby@cisco.com

thanks,

Bobby

Cisco Employee

Re: WS-X6K-S2U-MSFC2

MSFC2A for Sup2 was never released in the field. Not sure how your reseller got hold of it. You might want to return it and get a replacement.

461
Views
0
Helpful
2
Replies
CreatePlease login to create content