We bought a supervisor engine WS-X6K-SUP1A-PFC for Cat 6506 one year ago. We would like to make Cat6506 as L3 switch but in the MSFC2 installation note I found that we cannot install the MSFC2 on a supervisor engine that it has only a Policy Feature Card (PFC). Shall we buy another module of supervisor engine and get rid of the old one?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...