cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
242
Views
0
Helpful
2
Replies

x25 over isdn the idle timout does not function

dzehetmayer
Level 1
Level 1

Hi Guys,

we have following problems

Hard- Software

Hardware: 7206

Software: 12.2(7c)

Problem description:

After the x25 vc is terminated the isdn connection doesn´t go down.

We have configured the isdn idle timeout with 30 sec.

and the fast idle timeout is 5 sec.

Our router is configured with encapsulation x25 dte. The connection is established from our router.

No disconnect messages is send from the other site.

What can we do does the line goes down?

The idle timeout has no function in our configuration.

thx Dieter

2 Replies 2

vmoopeung
Level 5
Level 5

check whether X.25 application which you are using any packet to be send out using debug ip packets using some access-list . find out the packets causing the line to stay up . Applying an access-list to block if its unwanted traffic .

Hi vmoopeung,

the x25 vc is down, no x25 traffic is going over the link.

The command show x25 vc bringing no output.

Intresting traffic can´t specified for x25 traffic.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: