Go to Cisco tac webpage, or click Cisco TAC link on home page, and select Software advisor under Tools and Utilities. You will need CCO login for this.
On this you can select first the platform, you are seeking a feature for, then select the feature you want. Once you choose this, you have the option to list all IOS from Cisco which supports, the particular feature. For 2600 the latest IOS which supports X.25/TCP translation is 12.2(8) T
X25/TCP translation is supported on the ENTERPRISE feature set. This is available on the "Software Center" on the Cisco site. The ENTERPRISE feature set is supported on the 2600 routers, but not on the 805 routers, so the 805 is really not a valid choice at this time for X25/TCP translation. I'll advise you do the translation on the 2600.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...