11-18-2003 02:55 PM - edited 03-02-2019 11:48 AM
I have an issue with an XOT tunnel. A call to called address 17 from 67 calling address is being specifically routed to XOT tunnel 10.10.10.34
Any ideas ???
From router configuration.
x25 route ^17 xot 10.10.10.134 10.10.10.146
From DEBUG X25
Nov 19 09:34:56: [10.10.10.130,1998/10.10.10.129,12063]: XOT I D1 Data (218) 8 lci 1 PS 0 PR
Nov 19 09:34:56: [10.10.10.130,1998/10.10.10.129,13739]: XOT O P2 Call (13) 8 lci 1
Nov 19 09:34:56: From (2): 67 To (2): 17
Nov 19 09:34:56: Facilities: (6)
Nov 19 09:34:56: Packet sizes: 512 512
Nov 19 09:34:56: Window sizes: 2 2
Nov 19 09:34:56: [10.10.10.130,1998/10.10.10.129,13739]: XOT I P2 Clear (5) 8 lci 1
Nov 19 09:34:56: Cause 0, Diag 129 (DTE originated/Unknown diagnostic)
Nov 19 09:34:56: <detached>: XOT O P7 Clear Confirm (3) 8 lci 1
Nov 19 09:34:56: [10.10.10.130,1998/10.10.10.129,12063]: XOT I D1 Data (191) 8 lci 1 PS 1 PR
From router configuration.
x25 route ^17 xot 10.10.10.134 10.10.10.146
Cisco_3640#sh x25 route
# Match Substitute Route to
1 dest 3 xot 10.10.10.134
10.10.10.146
2 dest 4 xot 10.10.10.134
10.10.10.146
3 dest 1 xot 10.10.10.130
10.10.10.142
4 dest ^11$ xot 10.10.10.130
10.10.10.142
5 dest ^12$ xot 10.10.10.130
10.10.10.142
6 dest 2 xot 10.10.10.130
10.10.10.142
7 dest 5 xot 10.10.10.130
10.10.10.142
8 dest 7 xot 10.10.10.130
10.10.10.142
9 dest ^17 xot 10.10.10.134
10.10.10.146
Cisco_3640# 10.10.10.146
11-24-2003 04:02 PM
This doc has a good exmple of XOT with debugs. Check if it helps you :
http://www.cisco.com/en/US/tech/tk713/tk730/technologies_configuration_example09186a0080093c0e.shtml
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide