Hi - I got a 2912 switch without a IOS. I'm trying to use Xmodem to load the IOS I download from the Cisco web site, using Win 98 with Internet Exploxer. I have double checked my HT setting, they are set as 9600,8,N,1,N.
When I enter the command copy xmodem: Flash:c2900XL-c3h2s-mz-120.5.2-XU.bin, and then tell HT to send the file, I get the "I/O error" from the switch.
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does