I have destroyed the images on a msfc-Engine-Card. From our second msfc-Card, I have copy the images to an tftp-Server, then I want to upload the images over a serial-line with rommon> xmodem, 8bit, no parity, 1 Stopbit, hardware control, crc16?
The upload doesn't function with the error
"not a valid bootable image".
I've tested it with minicom and hyperterm, no bytes are accepted.
My mistake was, that I didn't know the difference between rp and sp rommon (hybrid-system). On the secondary MSFC-Card I see only the sp-rommon with the bootflash-Program RTSYNC... Now I want to get the sp-rommon, with Control-keys or with a confreg command?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.