Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

xot -call parameters

I have an interface x25 with ips=ops=1024 and win=wout=7. For this interace I receive a call request with 128 2. This call is forwarded in xot. The problem is that xot change the call paramaters and insert 1024 7 ( the interface defaults).

Somebody know that is possible to solution this?

Thanks.

1 REPLY
Bronze

Re: xot -call parameters

It may be a configuration issue. Look at the following link to see if it helps. http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/cbook/cx25.htm

88
Views
0
Helpful
1
Replies
CreatePlease to create content