12-05-2006 05:25 AM - edited 02-21-2020 02:45 PM
Hi all,
I got 2 cisco vpn clients which connect to a pix 506E. Each Cisco client has it?s own grouname and password and gets it?s own ip from the pix.
The clients itself share one DSL conncetion over a router.
Problem:
When both clients connect to the pix only one client, the first wich connects, is possible to transfer data (ping a pc or server and share files). The other client is not possbile to make a ping but is still connected.
What could be the problem ?
P.S: As soon as possible I will get the sh run, sh isakmp sa and sh crypto ipsec
Regards
Kai
12-06-2006 02:05 AM
12-06-2006 02:26 AM
It looks like nat traversal issue
try command
isakmp nat-traversal 20
M.
Hope that helps rate if it does
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide