Have a 2600 with AIM-VPN. Never seen an AIM-VPN before. What is it? IS there any special IPSec configuration since I have it or do I go about my ISAKMP and Crpto-ipsec policy stuff as usual? Need a solid link or information on how to configure IPSEC into it with a Cisco 3.6 unified client. Going to Authenticate to ACS. Any info is greatly appreciated.
AIM-VPN is a hardware acceleration card. So instead of the router using it's processor to handle the encrypt/decrypt, that functionality is handed over to this card, which has special chips that deal with encrypt/decrypt calculation faster.
Client to router 3.X sample config is here with ACS:
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...