Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

3000 concentrator remote lan subnet issues

Hello, i have a remote network that connects to my 3000 gadjet. They recently changed their scheme around so that their subnet is 192.168.3.0, the same subnet my concentrator is on. since then the client cant connect. Had something similar with another remote lan once, being assigned to .1.0. Once it was switched to a .4.0 the problem went away. But that was a very small network, and this other is a fairly large one. Is there any way to get this thing to connect without redoing the subnets on these two networks?

5 REPLIES
Gold

Re: 3000 concentrator remote lan subnet issues

yes, you can configure nat and ipsec together. i.e. both vpn device nat the original subnet before encrypting the traffic.

the doc below is a sample config for a concentrator and a pix:

http://www.cisco.com/en/US/partner/tech/tk583/tk372/technologies_configuration_example09186a00800949f1.shtml

New Member

Re: 3000 concentrator remote lan subnet issues

Everything hates me today, all i get when trying to go to that page is a notification that my password has been reset.

Gold

Re: 3000 concentrator remote lan subnet issues

post your email add and i'll email you the doc.

New Member

Re: 3000 concentrator remote lan subnet issues

wglover@fmrs.org

thanks much.

Gold

Re: 3000 concentrator remote lan subnet issues

please check your email account.

118
Views
0
Helpful
5
Replies
CreatePlease to create content