Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3002 VPN to 1811 router

I have a 3002 vpn connecting to a cisco ios router. The vpn tunnel is up and running but I cannot ping anything from behind the 3002 to anything off the router. I'm using a 192.168.18.0/24 on the 3002 and 192.168.15.0/24 on the router. The 3002 is doing network extension mode with split tunneling. What could be causing this issue? acl? route map? nat?

Any help would be appreciated

1 REPLY
Silver

Re: 3002 VPN to 1811 router

By default, you cannot use NEM in a group unless you check Check to allow hardware clients using Network Extension Mode to connect. For more information on the VPN 3002 Hardware Client, refer to

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a008009481c.shtml#mon2

106
Views
0
Helpful
1
Replies
CreatePlease login to create content