Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
Community Member

3005 VPN - error unable to add static route.

Plse assist if possible, I am getting this message on our VPN

concerntrator and the user therefore can not connect anywhere:

26028 06/29/2006 09:03:19.800 SEV=4 IP/6 RPT=9

Unable to add static route to

How can I resolve this?

See full log below:

26016 06/29/2006 09:03:18.540 SEV=4 IKE/52 RPT=773

Group [3rdParty] User [Matador1]

User (Matador1) authenticated.

26017 06/29/2006 09:03:18.670 SEV=5 IKE/184 RPT=771

Group [3rdParty] User [Matador1]

Client Type: WinNT

Client Application Version:

26019 06/29/2006 09:03:19.780 SEV=4 AUTH/22 RPT=1019

User [Matador1] Group [3rdParty] connected, Session Type: IPSec

26020 06/29/2006 09:03:19.780 SEV=4 IKE/119 RPT=1113

Group [3rdParty] User [Matador1]


26021 06/29/2006 09:03:19.790 SEV=5 IKE/25 RPT=769

Group [3rdParty] User [Matador1]

Received remote Proxy Host data in ID Payload:

Address, Protocol 0, Port 0

26024 06/29/2006 09:03:19.790 SEV=5 IKE/34 RPT=3183

Group [3rdParty] User [Matador1]

Received local IP Proxy Subnet data in ID Payload:

Address, Mask, Protocol 0, Port 0

26027 06/29/2006 09:03:19.790 SEV=5 IKE/66 RPT=3166

Group [3rdParty] User [Matador1]

IKE Remote Peer configured for SA: ESP-3DES-MD5

26028 06/29/2006 09:03:19.800 SEV=4 IP/6 RPT=9

Unable to add static route to

26029 06/29/2006 09:03:19.920 SEV=4 IKE/49 RPT=4336

Group [3rdParty] User [Matador1]

Security negotiation complete for User (Matador1)

Responder, Inbound SPI = 0x75e81b7e, Outbound SPI = 0xd54fdca5

26032 06/29/2006 09:03:19.930 SEV=4 IKE/120 RPT=4336

Group [3rdParty] User [Matador1]

PHASE 2 COMPLETED (msgid=689ff330)

26033 06/29/2006 09:03:19.930 SEV=4 NAC/27 RPT=769

NAC is disabled for peer - PUB_IP:,


26034 06/29/2006 09:04:21.990 SEV=5 IKE/50 RPT=1618

Group [3rdParty] User [Matador1]

Connection terminated for peer Matador1.

Reason: Peer Terminate

Remote Proxy, Local Proxy

26037 06/29/2006 09:04:21.990 SEV=5 IKE/194 RPT=850

Group [3rdParty] User [Matador1]

Sending IKE Delete With Reason message: No Reason Provided.

26039 06/29/2006 09:04:22.000 SEV=4 AUTH/28 RPT=843

User [Matador1] Group [3rdParty] disconnected:

Session Type: IPSec

Duration: 0:01:02

Bytes xmt: 0

Bytes rcv: 0

Reason: User Requested

26042 06/29/2006 09:04:22.000 SEV=4 IPDBG/5 RPT=9

Unable to delete static route to

Hall of Fame Super Gold

Re: 3005 VPN - error unable to add static route.


Does the concentrator already have a route to address or does this address fall into a subnet that the concentrator has defined?



CreatePlease to create content