3640 VPN setup for Remote Client Access

[asucla]

Looking for information to setup the following...

3640 VPN setup for Remote Client Access

1. Enable Cisco Catalyst 3640 VPN IPsec

running IOS 12.1

4 Fast Ethernet Ports with 100TX backbone connection to the Internet

2. allowing at home workers with DSL Static IPs to connect to our internal network via the Cisco VPN Client

[ciscomoderator]

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you, or there is no public information available at this time. If you don't get a suitable response to your post, you may wish to review our resources at the online http://www.cisco.com/go/solutions. You may also contact our product information line at 1-800-553-NETS or a Cisco Systems Engineer at your local Cisco office or reseller. To locate your local Cisco representative, visit http://www.cisco.com/warp/public/687/Directory.shtml

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

[jfrahim]

I believe this configuration would be helpful

http://www.cisco.com/warp/customer/480/xauthlocal.html