Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

3DES Installation

What is the procedure for the installation of 3DES activation key on Cisco PIX 525 series?.

Thanks in advance.

R.a.M.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: 3DES Installation

If you're running 6.2 and above then just use the activation-key command.

If you're running 6.1 and below, you have to upgrade the code via the console, and after the code has been loaded it'll ask you if you want to enter in a new activation key.

To be honest, it's probbaly easiest to upgrade to 6.2 and above and then just use the command.

See http://www.cisco.com/warp/public/110/upgrade.shtml for details.

2 REPLIES
Cisco Employee

Re: 3DES Installation

If you're running 6.2 and above then just use the activation-key command.

If you're running 6.1 and below, you have to upgrade the code via the console, and after the code has been loaded it'll ask you if you want to enter in a new activation key.

To be honest, it's probbaly easiest to upgrade to 6.2 and above and then just use the command.

See http://www.cisco.com/warp/public/110/upgrade.shtml for details.

Community Member

Re: 3DES Installation

Ok!, thanks for your help. His explanation was very clear.

R.a.M.

95
Views
0
Helpful
2
Replies
CreatePlease to create content