Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

6509 FWSM Xlate conn problem

We have 6509 FWSM in which we have configure VLAN's for different customers but for one customer sometimes he cant able to access his remote location.Once we clear Xlate all then it works fine.Network set up is like this way .

HO -------------POP (6509 FWSM)----------Remote

We have create VLAN for this cust & route traffice on that VLAN.

Is any one facing same problem.

TIA

SAM

2 REPLIES
Silver

Re: 6509 FWSM Xlate conn problem

When memory usage exceeds 90%, the clear xlate command may cause an unexpected FWSM reload.

New Member

Re: 6509 FWSM Xlate conn problem

I beleive you are running into resource limitation issues. If you are running the FWSM in mutiple-context mode please make sure that the customer has enough possible resources for normal operation. Just before you do a clear xlate try the following commands to get a better idea

show resource allocation detail

show resource usage detail

and look for the specific context

535
Views
0
Helpful
2
Replies