Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

aaa authentication

In PIX OS version 6.1, the "aaa authentication" command does not have the option to configur for either inbound or outbound. Is this mean when I configure the aaa authentication command, it's for both inbound and outbound??

If it is for both is ther a way of telling the pix to only authenticate the inbound traffic??

2 REPLIES
New Member

Re: aaa authentication

Not sure what you mean, but you can perform that using:

aaa authentication include | exclude authen_service inbound | outbound | if_name local_ip local_mask foreign_ip foreign_mask group_tag

or

you can use the newer:

aaa authentication match acl_name inbound | outbound | if_name group_tag

You may have been looking at the section that covers authentication TO the pix.

Here's the reference to 6.1 commands I listed above:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/cmd_ref/a.htm#xtocid1

HTH

Jeff

New Member

Re: aaa authentication

When do help for aaa on Pix OS ver 6.1(2), I don't see the option for inbound | outbound...why is this ?

79
Views
0
Helpful
2
Replies
CreatePlease login to create content