Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

AAA Command Console

(Note: This message was posted as part of the "Ask the Expert" Event on AAA that took place March 26 to April 6. Feel free to respond to or form discussions around this question)

Posted by dcalvin - SENIOR SYSTEMS ANALYIST, CISCO CONSULTANT

Using a 2511 and configuring AAA/Radius, what command is used so the console port will not prompt for a userid and password?? Same for telneting, want to use the Secret password like before using AAA. Please help. Thank You.

3 REPLIES
Bronze

Re: AAA Command Console

config tline con 0 login authentication NO_AUTHENT

New Member

Re: AAA Command Console

and also you should add this line to your router :

aaa authentication login NO_AUTHENT none

line con 0

login authentication NO_AUTHENT

line vty 0 4

login authentication NO_AUTHENT

New Member

Re: AAA Command Console

make sure you also create a groupp for any authorization or accounting to be by-passed also. You could be ending up being logged in but not being able to issue any commands.

ex

aaa authorization commands 15 NO-AUTHOR none

line con 0

authorization commands 15 NO-AUTHOR

297
Views
0
Helpful
3
Replies