Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

About PIX 520

Hi,

I’ve got this PIX 520 the show version of which is below… I’m about to

install the PIX os 6.3, can I also install more interfaces, as per the PIX 6.3 OS I

should be able to go to 8 10/100 interfaces am I correct. ? Are these the same four

port and single port interfaces as the current PIX 525 / 515

Thanks and Regards

-Kevin.

sh ver

Cisco Secure PIX Firewall Version 5.2(1)

Compiled on Tue 22-Aug-00 23:35 by bhochuli

pixfirewall up 277 days 19 hours

Hardware: SE440BX2, 128 MB RAM, CPU Pentium II 349 MHz

Flash i28F640J5 @ 0x300, 16MB

BIOS Flash AT29C257 @ 0xfffd8000, 32KB

0: ethernet0: address is 0090.27a3.0d9b, irq 11

1: ethernet1: address is 0090.27a3.1a52, irq 10

Licensed Features:

Failover :Enabled

VPN-DES :Enabled

VPN-3DES :Disabled

Maximum Interfaces :6

Cut-through Proxy :Enabled

Guards :Enabled

Websense :Enabled

Throughput :Unlimited

ISAKMP peers :Unlimite

2 REPLIES
Silver

Re: About PIX 520

520 supports a max of 6 physical interfaces per the command reference for the 6.3 OS.

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/gl.htm#1075586

New Member

Re: About PIX 520

Sure, the only thing that would hold you back is if the pix is restricted but this looks to be unrestricted.

241
Views
0
Helpful
2
Replies