Access DMZ Host via Global IP

[halletta]

Not sure if this is possible, but we have a host on a PIX 515e DMZ with local address 192.168.2.2 & a global address defined via a static (dmz,outside) statment. External hosts can access the server via the global address - no problem. Although we have full access to the host from inside via the 192 address, is it possible to access the host via its global address from inside - some of our applications are hard coded to use the global IP!! This used to work with our old firewall.

Any help much appreciated.

Thanks

[mehrdad · Accepted solution]

alias can help you :

alias (inside) dmz_global_ip_address dmz_local_ip_address 255.255.255.255

for more information :

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094aee.shtml#topic1

[halletta]

Thanks - just what was needed.