Not sure if this is possible, but we have a host on a PIX 515e DMZ with local address 192.168.2.2 & a global address defined via a static (dmz,outside) statment. External hosts can access the server via the global address - no problem. Although we have full access to the host from inside via the 192 address, is it possible to access the host via its global address from inside - some of our applications are hard coded to use the global IP!! This used to work with our old firewall.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...