Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Access-list and route-maps/NAT

Good day;

Need some advice if I may ask I'm trying to do a static nat using route maps so I can just add subnets in the future does this look like it will work. I have a BGP connection and I have to NAT my address to his as follows:

ip nat inside source static 192.168.11.19 170.132.237.49 route-map vnet-nat extendable

ip nat inside source static 192.168.11.37 170.132.237.50 route-map vnet-nat extendable

ip nat inside source static 192.168.11.22 170.132.237.51 route-map vnet-nat extendable

ip nat inside source static 192.168.11.40 170.132.237.52 route-map vnet-nat extendable

ip nat inside source static 192.168.11.42 170.132.237.53 route-map vnet-nat extendable

ip nat inside source static 192.168.11.24 170.132.237.54 route-map vnet-nat extendable

ip nat inside source static 192.168.11.20 170.132.237.55 route-map vnet-nat extendable

ip nat inside source static 192.168.10.62 170.132.237.56 route-map vnet-nat extendable

ip access-list extended VNet-in

permit tcp 10.254.26.0 0.0.0.255 192.168.10.0 0.0.0.255

permit tcp 10.254.27.0 0.0.0.255 192.168.11.0 0.0.0.255

p access-list extended VNet-out

permit tcp 192.168.10.0 0.0.0.255 10.254.26.0 0.0.0.255

permit tcp 192.168.11.0 0.0.0.255 10.254.27.0 0.0.0.255

ip access-list extended vnet-nat

permit ip any 170.132.237.48 0.0.0.15

route-map vnet-nat permit 10

match ip address vnet-nat

Thank you in advance

2 REPLIES
Silver

Re: Access-list and route-maps/NAT

New Member

Re: Access-list and route-maps/NAT

Thank you for the information but I was able to figure it out....I appreciate the info!!!!

101
Views
0
Helpful
2
Replies