Basically, if you want to allow access to a particular segment/interface from other segments, you need to modify/work on the ACL ties to the interface where the traffic is originate or where the accessing host located.
For example, to allow access from outside to DMZ1, you need to edit/modify ACL on the outside interface (need to have static nat your DMZ IP to public/outside IP as well).
Same goes to controlling/allowing outside or internet users accessing your inside host. You need to edit/modify your ACL applied to the outside interface.
Firewall will automatically allow the returning traffic to pass through
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...