Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Access to DMZ web server goes from inside to outside and not via the DMZ.

When trying to access the web server on the DMZ, all internal addresses go the the outside connection and use the outside IP address instead of going straight to the DMZ using the address on the DMZ. The browser is not able to find the real IP address of the web server. This has been intermitant, but now is constant. What can we put on our Pix 515 to go straight to the web server on the DMZ?

3 REPLIES
Gold

Re: Access to DMZ web server goes from inside to outside and not

Hi -

Have you got a static statement like the example below on you PIX config:

static (inside,dmz) 192.168.5.0 192.168.5.0 netmask 255.255.255.0

Remember to issue cmd clear xlate and save with write memory.

Jay.

New Member

Re: Access to DMZ web server goes from inside to outside and not

Yes, that statement is there.

Gold

Re: Access to DMZ web server goes from inside to outside and not

Hi,

Okay, can you post your PIX config pls, either here on the forum or direct to myself at : jmia@ohgroup.co.uk

Pls remember to change real IPs and passwords etc.

Thanks - Jay.

101
Views
0
Helpful
3
Replies