ACL Logging

[owalter]

When testing the log option of ACLs i found

in the message guide description 5 different messages

all starting with :

%SEC-6-IPACCESSLOG

Here are the all of them :

%SEC-6-IPACCESSLOGDP ....

%SEC-6-IPACCESSLOGNP ....

%SEC-6-IPACCESSLOGP ....

%SEC-6-IPACCESSLOGRP ....

%SEC-6-IPACCESSLOGS .....

What is the meaning of this ?

Also i cannot find an explanation of the

syntyx. In the first message (DP) there is

a part described in the guide as :

([dec]/[dec]) in my test setup the log messages

here fill in (0/0).

What is the meaning of this ?

[supertoaster2]

I used Output Interperter, I hope this helps. It just telling you that log against an access-list worked.

ERROR MESSAGE NOTIFICATIONS (if any)

%SEC-6-IPACCESSLOGDP (x1): list [chars] [chars] [chars] [IP_address] [chars]->

[IP_address] ([dec]/[dec]), [dec] packet[chars]

Explanation: A packet matching the log criteria for the given access list has

been detected.

Recommended Action: No action is required.