I have a DHCP server and I am going to install a new ACS server to handle authentication so when a user connects to the network it will be authenticated by the ACS server and after that the DCHP server will assign an IP address to the user. Is there any doc that shows how to configure the ACS to ask the DHCP server for the IP address of the user? or how to configure the 2 servers to work together?
If the ACS will only be used for authentication of users and not as DHCP server then there is no need for ACS to ask DHCP server for IP address. The client itself can be configured to take IP address from the DHCP server and only the authentication request should be served by the ACS.
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...