Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

ACS Authentication (Radius) for VPN 5000 - No Error ?

I am using Cisco Secure ACS 2.5 on NT to authenticate users connecting to a VPN 5001 concentrator (V5.2.19). ACS is configured to authenticate against an external DB (A windows NT Domain). Everything works fine until a user incorrectly enters their password. When this happens no error is returned to the VPN client, it will just hang and timeout without any message at all.

Has anyone run into this problem ?

Thanks,

-Tom Smith

1 REPLY

Re: ACS Authentication (Radius) for VPN 5000 - No Error ?

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

110
Views
0
Helpful
1
Replies
CreatePlease to create content