Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

ACS Configuration

I'd need some information on CiscoSecure ACS.

I've read on Cisco's web-site that I can import a text file into the

CiscoSecure, in particular of the format reported below (concerning

mobile IP).

My questions are:

1) in which way can I import such a file? With the command line

interface I've founded a different format..

2)For which release of the CiscoSecure is this format valid?

3) Is it possibile to completely configure the ACS via a

text file? How?

Thank you for your attention and time.

This format can be imported into a CiscoSecure server.

user = 20.0.0.1 {

service = mobileip {

set spi#0 = "spi 100 key hex 12345678123456781234567812345678"

}

}

user = 20.0.0.2 {

service = mobileip {

set spi#0 = "spi 100 key hex 12345678123456781234567812345678"

}

}

user = 20.0.0.3 {

service = mobileip {

set spi#0 = "spi 100 key hex 12345678123456781234567812345678"

}

}

Example retrived from this address

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_c/ipcprt1/1cdmobip.htm#40150

1 REPLY

Re: ACS Configuration

I think u can use CSUtil.exe to import the file.

80
Views
0
Helpful
1
Replies
CreatePlease to create content