active FWSM outside interface went to monitor once standby FWSM shutdown
I have 2 FWSM running in active/standby mode. During a regular power maintenance, we shut down the standby FWSM and noticed that on our active FWSM the outside interface went to monitoring mode and stop receiving traffic.
This host: Primary - Active
Active time: 5667794 (sec)
Interface outside (*.*.*.*8): Waiting
Interface FDE (*.*.*.5): Normal (Not-Monitored)
Interface HR (*.*.*.*): Normal (Not-Monitored)
Interface BVoice (*.*.*.*): Normal (Not-Monitored)
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...