Tried to use AES-128. Set up IKE proposal with (Authentication = Preshared Keys, Authentication Algorithm = MD5/HMAC-128, Encryption Algorithm = AES-128, Diffie-Hellman Group: Group 2 (1024-bits). Also, set up SA with (IPSec Authentication Algorithm = ESP/MD5/HMAC-128, Encryption Algorithm = AES-128, IKE Negotiation Mode = Main, with IKE proposal as described above).
From VPN Client, got sequence: a) Initializing the connection..., b) Initiating TCP to x.x.x.x, port y..., c) Contacting the gateway at x.x.x.x..., d) Authenticating user...
[ At this point, the group is already authenticated ] Entered use id and pw. then got responds: e) Securing communication channel..., f) Remote peer terminated connection.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...