06-11-2002 12:58 PM - edited 02-21-2020 11:47 AM
Adding TACACS on a new router, already have an existing TACACS environment. I add the TACACS statements, quit the console session I get the 'press return to get started' message. I press return and the screen rolls up and displays again 'press return to get started'. When I scroll up, I see 'authentication failed' when i've entered nothing.... Don't know why.
06-11-2002 02:13 PM
You may have locked the console /login access accidentaly..Try to telnet to the router and see if that works..Otherwise, you need to do password recovery located at
http://www.cisco.com/warp/public/474/index.shtml
and after that start entering those commands again carefully..Thx..Tejal
06-11-2002 02:21 PM
Thanks for the response but I just found the problem. I looked at the AAA server and saw that I had a key mismatch. Even though the keys entered on the router and the aaa server, there was some unprintable character or something going on. Anyway, all is well and thanks again.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: