Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

After upgdate pix535 os ,pix Ignoring PCI card in slot 4

pix ignoring two pci card ,why ??

show ver list below :

Serial Number: 405300167 (0x182863c7)

Activation Key: 5f6dcede db39a37e bdd89444 a1142d0e

Do you want to enter a new activation key? [n]n

Writing 2494520 bytes image into flash...

1024MB RAM

Ignoring PCI card in slot:4 (vendor:0x8086 deviceid:0x1229 revisionid:0xc)

Ignoring PCI card in slot:5 (vendor:0x8086 deviceid:0x1229 revisionid:0xc)

Flash=i28F640J5 @ 0x300

BIOS Flash=DA28F320J5 @ 0xD8000


|| ||

|| ||

|||| ||||


c i s c o S y s t e m s

Private Internet eXchange


Cisco PIX Firewall

Cisco PIX Firewall Version 6.1(4)

Licensed Features:

Failover: Enabled

VPN-DES: Enabled

VPN-3DES: Disabled

Maximum Interfaces: 10

Cut-through Proxy: Enabled

Guards: Enabled

Websense: Enabled

Inside Hosts: Unlimited

Throughput: Unlimited

ISAKMP peers: Unlimited

Not enough supported network interface cards installed.

PIX requires at least 2 supported interface cards,

but only 0 supported interfaces were fou


Re: After upgdate pix535 os ,pix Ignoring PCI card in slot 4

I think you should get it replaced, as Cisco has already given a field notice for this. For more details check the following URL,