Hi I have a 2620 router and we bought a AIM-VPN/BP module. The router's existing IOS/Hardware configuration is :
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK2S-M), Version 12.0(7)XK1, EARLY DEPLOYMENT REL
EASE SOFTWARE (fc1)
System image file is "flash:aaa1324.bin"
cisco 2620 (MPC860) processor (revision 0x200) with 56320K/9216K bytes of memory
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
So what else need on my router inorder to successfully complete the installation and configuration. We need the 3DES Encryption. Please do advise with required available software and memory requirements.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...