03-15-2006 03:26 AM - edited 03-09-2019 02:16 PM
Hi there, I have an issue I am trying to figure out.
I have a PIX 506E.
I have an inside network of 10.25.0.0/16
I have some static 1-to-1 translations setup for a webserver that is behind the pix, and I have rules setup to open port 80.
64.4.200.125 maps to 10.25.200.125
From the outside world, you can access http at 64.4.200.125
From the inside server, you can access http at 10.25.200.125
The problem is, from the inside, when you try to access the DNS name, which of course maps to 64.4.200.125, the system fails.
I used in old version pix os alias command and worked.
Now i use new pix os 6.3.3 and alias command is not supported.
what do i do now?
best regard
03-15-2006 05:05 AM
If you have an internal DNS server you can fix it there so that it resolves correctly to the inside address. Another method for PIX 6.2 and later:
static (dmz,inside) translated_IP real_ip dns
IE
static (dmz,inside) 209.165.202.128 172.16.1.5 netmask 255.255.255.255 dns
03-15-2006 05:52 AM
Thank for your reply
but i wrong to write the question
sorry,
i have to migrate from version 5 to version 6.3.3 os pix and the alias command is not supported.
I don't know that is the new command used now.
Thank a lot
IE
alias (inside) 180.17.44.11 10.17.44.11 255.255.255.255
alias (inside) 180.17.44.12 10.17.44.12 255.255.255.255
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide