Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ASA 5505 7.2(2) Need help with QOS guarnantee bandwidth

I have a bonded T1 3 MB circuit and need to add QOS to allow guaranteed 1.5 MB throughput to below IPSEC tunnel  destination 10.10.22.0. Then all other internet traffic fifo.

We are using ISO 7.2(2) and ASDM 5.2(2)

What's the best way to configure QOS for described setup?

access-list outside_20_cryptomap extended permit ip 192.168.16.0 255.255.255.0 10.10.22.0 255.255.255.0

crypto map outside_map 20 match address outside_20_cryptomap

crypto map outside_map 20 set peer 64.84.x.x

crypto map outside_map 20 set transform-set ESP-AES-256-MD5

tunnel-group 64.84.x.x type ipsec-l2l

tunnel-group 64.84.x.x ipsec-attributes

pre-shared-key *

2 REPLIES

ASA 5505 7.2(2) Need help with QOS guarnantee bandwidth

as I know asa dosnt support qos

ASA 5505 7.2(2) Need help with QOS guarnantee bandwidth

Hi David,

did you look at the 7.2 configuration guide... unfortunatly the ASA QoS is as versatile as Cisco IOS routers but it does provide basics like priority queuing, shaping and policing:

http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/qos.html#wp1084096

Also, might want to consider upgrading the code since the one you're running is 7 years old.

Patrick

1037
Views
0
Helpful
2
Replies