cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
435
Views
0
Helpful
2
Replies

Asa 5505, the outside cant access to a server in the inside

andresfmg
Level 1
Level 1

hi, i have an Asa 5505, a pc in the outside with the ip 10.1.1.6 cant access to a server in the inside 192.168.1.4, pls help...

this is my conf:

ASA Version 8.0(4)

!

hostname ciscoasa

domain-name default.domain.invalid

enable password 8Ry2YjIyt7RRXU24 encrypted

passwd 2KFQnbNIdI.2KYOU encrypted

names

!

interface Vlan1

nameif inside

security-level 0

ip address 192.168.1.1 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

ip address 10.1.1.2 255.255.255.0

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

boot system disk0:/asa804-k8.bin

ftp mode passive

dns server-group DefaultDNS

domain-name default.domain.invalid

object-group protocol TCPUDP

protocol-object udp

protocol-object tcp

access-list 100 extended permit tcp any host 10.1.1.3 eq www

pager lines 24

logging enable

logging asdm debugging

mtu inside 1500

<--- More --->

mtu outside 1500

no failover

icmp unreachable rate-limit 1 burst-size 1

asdm image disk0:/asdm-613.bin

no asdm history enable

arp timeout 14400

nat-control

global (outside) 1 interface

nat (inside) 1 0.0.0.0 0.0.0.0

static (inside,outside) 10.1.1.3 192.168.1.4 netmask 255.255.255.255

access-group 100 in interface outside

timeout xlate 3:00:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00

timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00

timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

dynamic-access-policy-record DfltAccessPolicy

http server enable

http 192.168.1.0 255.255.255.0 inside

no snmp-server location

no snmp-server contact

snmp-server enable traps snmp authentication linkup linkdown coldstart

crypto ipsec security-association lifetime seconds 28800

crypto ipsec security-association lifetime kilobytes 4608000

<--- More --->

telnet timeout 5

ssh timeout 5

console timeout 0

dhcpd auto_config outside

!

dhcpd address 192.168.1.2-192.168.1.254 inside

dhcpd enable inside

!

threat-detection basic-threat

threat-detection statistics access-list

no threat-detection statistics tcp-intercept

!

class-map inspection_default

match default-inspection-traffic

!

!

policy-map type inspect dns preset_dns_map

parameters

message-length maximum 512

policy-map global_policy

class inspection_default

inspect dns preset_dns_map

inspect ftp

<--- More --->

inspect h323 h225

inspect h323 ras

inspect rsh

inspect rtsp

inspect esmtp

inspect sqlnet

inspect skinny

inspect sunrpc

inspect xdmcp

inspect sip

inspect netbios

inspect tftp

!

service-policy global_policy global

prompt hostname context

Cryptochecksum:14e7b74fabc386613ae646b915f60e9e

: end

ciscoasa#

2 Replies 2

Jon Marshall
Hall of Fame
Hall of Fame

Andres

The security level for your inside interface should be 100 ie.

interface Vlan1

nameif inside

security-level 100

ip address 192.168.1.1 255.255.255.0

!

After changing that can you

1) ping the outside interface of the ASA from the pc or ping the PC from the ASA

2) I'm assuming you are trying to connect to 10.1.1.3 when you attempt the connection ?

Jon

Hi

yes is an error the security-level actually is on 100 right now. but still not work.

any other idea ?

Review Cisco Networking products for a $25 gift card