ASA 5510 7.08(8)

[mgibson]

I have been trying to setup my ASA to block P2P traffic. I followed the guide here http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808c38a6.shtml. When I make this my config I lose all HTTP traffic. I also tried to upgrade my ASA to 7.1 and when the system reboots I get the following error:

Total NICs found: 7

mcwa i82557 Ethernet at irq 11 MAC: 0022.9008.d4e0

mcwa i82557 Ethernet at irq 5 MAC: 0000.0001.0001

No BIOS flash found.

Any help with why I am having problems would be appreciated. I have it working so far, I just need to block P2P traffic.

mark

[mgibson]

I got the upgrade part fixed. I had to downgrade to 7.0(5), then jump to 7.2(1) then to 8.0(4). I will try P2P block again.

mark