Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

ASA 5510 ip failover

Is it possible to configure an ASA 5510 with two different ISP's such that if the main ISP goes down for any reason, it will automatically go to the second ISP? Both of the ISP's will come into the ASA 5510 via cat5, not serially, as 1 is a cable modem and the other is a dsl modem. Thanks, Jeremy Rich

2 REPLIES

Re: ASA 5510 ip failover

Hi,

Check the following link for the PIX/ASA configuration details when connecting to 2 ISPs.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtml

Rgds,

AK

New Member

Re: ASA 5510 ip failover

You would need to be on 7.2(1) code which has the track option. Track allows you to track the ISP connecting interface of your Primary ISP and have a secondary default route with a higher metric to failover to when the Primary ISP fails.

ASA/PIX 7.x to Support Dual ISP Links Configuration Example:

http://www.cisco.com/en/US/customer/products/hw/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtml

Sincerely,

Norman Wong

180
Views
0
Helpful
2
Replies
CreatePlease to create content