I currently have an ASA5510 unit that I'm doing an SSL "thin" client VPN connection to in order to get to the network behind it. I can get connected and pass traffic just fine, however, I cannot get the split-tunneling functionality to work. When the client is connected and I go into the details on the connection, under "Transport", it states "Split Tunneling: Disabled" and "Local Network: Disabled". Is there any trick to getting that to work? I've been into all the available policies and groups, and have split tunneling selected under the policy, but it keeps coming up disabled. Any help would be appreciated. Thank you!
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...