I have a question regarding the load-balancing and SSL Certificates. I have 2 ASA's uk1 and uk2. I then set up the cluster ip address and assign this as Web in DNS. I have then got a certificate for each asa (uk1 and Uk2) and a certificate for web. I've then set the ASA to redirect to the FQDN. When I assign the Certificate "Web" to the outside interface, users get a warning (that the wrong servername is being used) when they are re-directed to the Uk1 or UK2. If I out the Uk1 or UK2 certificate on the Outside interface I get a warning when users go to Web (again that the wrong servername is being used). Any ideas how I can get around this?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...