I have a customer who is using a Pix firewall for his remote users and has setup a VPN Group and password and sent them all the .pcf file, they do not have to login locally or into a Radius server, just lanch the VPN client and there connected. On the ASA when I setup a Remote connection through the ASDM it asks for a username outside of the VPN Group name and preshare password, so when I connect it asks for a username and password, is there a way on the ASA to just have it like the PIX and connect without asking for a username and password?
If you have numerous Cisco VPN Clients, it is very hard to remember all the VPN Client usernames and passwords. In order to store the passwords in the VPN Client machine, configure the ASA/PIX and the VPN Client as this section describes.
Use the group-policy attributes command in global configuration mode:
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...