Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

asa 5520 eigrp redistribute default route

Hello

I have asa 5520 and i need redistribute defailt route with eigrp but asa do not redistribute default route is this possible from asa i have this config

router eigrp 10

no auto-summary

distribute-list eigrp-distribution out interface outside

distribute-list eigrp_core out interface inside

network 192.168.50.0 255.255.255.0

network 0.0.0.0 0.0.0.0

redistribute connected

redistribute static route-map DISTRIBUTE-STATIC

route-map DISTRIBUTE-STATIC permit 10

match ip address DISTRIBUTE-STATIC

access-list DISTRIBUTE-STATIC line 1 standard permit host 0.0.0.0 (hitcnt=5

4 REPLIES
Silver

Re: asa 5520 eigrp redistribute default route

Do you see default route in the EIGRP topology table?

Post relevant output of topology table

show ip eigrp topology

HTH

Saju

Pls rate helpful posts

New Member

Re: asa 5520 eigrp redistribute default route

i have this default route

P 0.0.0.0/0, 1 successors, FD is 1536

via Summary (1536/0), Null0

Silver

Re: asa 5520 eigrp redistribute default route

Hi ,

As per link below , default route is automatically redistributed into EIGRP

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008086ebd2.shtml

If you remove "redistribute static" do you still see that entry in the topology table ?

HTH

Saju

New Member

Re: asa 5520 eigrp redistribute default route

yes i have still this entry

P 0.0.0.0/0, 1 successors, FD is 1536

via Summary (1536/0), Null0

800
Views
0
Helpful
4
Replies