Hello,
i have one ASA5520 which is using 3 GigabitEthernet Interfaces.
1- Outside Interface
2- Inside Interface
3- DMZ Interface
The outside interface is using for Internet connection which connect to a Internet gateway router.
The inside interface is using for internal network (Server Farm), and the DMZ interface is for VPN Connection
to my branch office(using PIX 506E at branch).
The question is how to configure Access-list ,NAT to allow the user at branch office to access
my internal headoffice network and Internet on the ASA.
Very much appreciated for your prompt reply.
Regards,
Vin