Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ASA 5520 with SSM-20 IPS Module

Installing ASA 5200 with SSM-20 module. Using three Interfaces for connections to remote offices, inside network, DMZ & outside access. Forth interface management only.

Looking for updated documentation on promiscuous/inline monitoring. Need to monitor ALL interfaces.

Any help would be grateful !

1 REPLY
New Member

Re: ASA 5520 with SSM-20 IPS Module

Hi,

Just follow the link below and you should be able to get it working. :D

Just remember that gig0/0 of the SSM-20 is the command and control interface and gig0/1 is the sensing interface which is connected to the backplane.

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids11/cliguide/clissm.htm

hth,

Ansley

113
Views
0
Helpful
1
Replies