I have a couple vlans on the inside that are confiured in an router, it is also def-gate to all clients. Further there is a link net (172.16.200.0/24) to the ASA 172.16.200.10 (also def-route on the router). There is no access between vlan 10 and 20 and i cannot use access-list in the router for this. Instead i tried to use vpn client to get this access, but this demands that traffic enter and exit inside interface 172.16.200.10. An ip pool is created (10.10.10.0 also have access to all vlans). But i get the following error "No translation group found"
Does anyone now if this solution is possible? /Regards
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...