Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ASA Management Interface

Having read the managment-only command description. It appears that only mangement traffic to the ASA is allowed on this interface (ASDM,Telent,SSH). It can not be used for NTP, SNMP, or logging. Is that correct. Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: ASA Management Interface

based on documentation the management-only interface will accept incoming traffic only. SNMP , NTP will not work as this will be outbound traffic.. you could convert the dedicated management0/0 port into a routed port by way of licensing for asa5510's and higher.

refer of out-of-band management port bottom of table.

http://www.cisco.com/en/US/products/ps6120/prod_models_comparison.html

rate any helpful posts.

Rgds

Jorge

1 REPLY

Re: ASA Management Interface

based on documentation the management-only interface will accept incoming traffic only. SNMP , NTP will not work as this will be outbound traffic.. you could convert the dedicated management0/0 port into a routed port by way of licensing for asa5510's and higher.

refer of out-of-band management port bottom of table.

http://www.cisco.com/en/US/products/ps6120/prod_models_comparison.html

rate any helpful posts.

Rgds

Jorge

255
Views
0
Helpful
1
Replies
CreatePlease to create content