Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA to PIX VPN fails to initialise

Hi

I have replaced a PIX with an ASA5510 running 7.2 code. The VPN to a 3000 series concentrator runs fine but the VPN to a PIX running 6.2 code only works if we issue a "clear crypto isakmp sa" on the PIX. It then runs fine until something interupts it (say the Internet connection drops for a few seconds). Then it never re-establshes until we again do a "clear crypto isakmp sa" on the PIX. Rebooting the ASA does not help. The connection from the ASA to the 3000 concentrator on the other hand comes back up fine after an interruption.

Any ideas ?

1 REPLY
New Member

Re: ASA to PIX VPN fails to initialise

All fixed now. Swapped the remote PIX for an ASA 5505 and teh issue just went away.

92
Views
0
Helpful
1
Replies