Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA transparent mode with secondary IP on the router

Hi

I have

Router --- ASA (Transparent)----Switch

and just wonder if it is possible to configure secondary IP on the router interface which is connected to ASA

so there is plenty of room in terms of LAN IP range.

Or to implement this, do I have change ASA to context mode and modify configuration on the ASA?

hope I do not have to change anything on the ASA.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: ASA transparent mode with secondary IP on the router

ASA in transparant mode work as L2 device

so what ever ips u use dosent matter

u dont need to change anything in the ASA while it is in transperant mod

but be careful of what is allowed to be passed through the firewall

u can control it by ACLs

the router and the switch u have will operat in L3 as thy connected directly or nothing between them from routing and layer three prespective

so they shoud be in the same subnet VLAN and so on

good lcuk

please, if helpful rate

1 REPLY

Re: ASA transparent mode with secondary IP on the router

ASA in transparant mode work as L2 device

so what ever ips u use dosent matter

u dont need to change anything in the ASA while it is in transperant mod

but be careful of what is allowed to be passed through the firewall

u can control it by ACLs

the router and the switch u have will operat in L3 as thy connected directly or nothing between them from routing and layer three prespective

so they shoud be in the same subnet VLAN and so on

good lcuk

please, if helpful rate

109
Views
0
Helpful
1
Replies