Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA upgrade procedure from 7.x to 8.x

I want to upgrade ASA from 7.0(1) to 8.0(2))and ASDM 5.2(1)to 6.0(2)for Cisco ASA 5505,but I only find a upgrade procedure for ASA from 7.0(1) to 7.0(2) and ASDM 5.2(1) to 5.2(2).

Please everyone can recommended me some tips about upgrade procedure, thanks all

5 REPLIES

Re: ASA upgrade procedure from 7.x to 8.x

I am not aware of code sequence steps upgrade for the ASA platform going from 7.x to 8.x.. Going through some docs to verify I did not come accross any warning notes when upgrading from 7.x to 8.x, so you should be able to upgrade both code and asdm to latest versions. if need more assistance let us know.

Go over this release note for version 8.0, again.. I do not see any code upgrade pre-requisites sequence for upgrading asa 7.0 straight to 8.0

http://www.cisco.com/en/US/docs/security/asa/asa80/release/notes/arn803n.html#wp37869

Other ASA code releases ,refer to"upgrading to new software" section on each code release link it should tell you about upgrading-downgrading procedures notes only from 7.2 to 8.0 and vice versa, but not mention on 7.0.

http://www.cisco.com/en/US/products/ps6120/prod_release_notes_list.html

Rgds

Jorge

Re: ASA upgrade procedure from 7.x to 8.x

May be too late to answer, but if you look at the TAC case # K63074088

Title: How to upgrade the software image on Adaptive Security Appliance 5500 Series to 7.x in a failover pair.

using the same procedure, i have upgraded ASA5505 (single unit) image from 7.2 to 8.0 (3)

hth

MS

Thank

New Member

Re: ASA upgrade procedure from 7.x to 8.x

Thanks your recommendation, if I have license to get ASA 8.03, how to get this ASA version, thanks for your help.

Re: ASA upgrade procedure from 7.x to 8.x

You can find code at this link. CCO access required.

http://www.cisco.com/cgi-bin/tablebuild.pl/asa

ASA Code : asa803-k8.bin

ASDM : asdm-603.bin

New Member

Re: ASA upgrade procedure from 7.x to 8.x

Thanks for your information, all the best.

3225
Views
5
Helpful
5
Replies
CreatePlease login to create content