Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA VPN client question

Hello.

I have a question about a connection between an asa5505-sec-bun-k9 (that acts as Easy VPN client) and a EASY VPN server.

The connection with the Easy VPN server is OK but I cannot more connect to internet and create VPN connections to my ASA5505 when I enable the feature.

Is this a normal condition with Easy VPN Client enabled?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: ASA VPN client question

cool

please, Rate if helpful

3 REPLIES

Re: ASA VPN client question

u need to do split tunneling on ur vpn server and apply it to the vpn client config on the vpn server that encypt only traffic destined to the server side pravite network

lets say the private network behind the vpn server is 192.168.1.0/24

so make a standard ACL

access-list split standard permit 192.168.1.0 255.255.255.0

group-policy [ur grop policy name] attributes

split-tunnel-policy tunnelspecified

split-tunnel-network-list value split

then when u connect from the easy client only traffic to 192.168.1.0 will go through the tunnel other traffic will not be part of encrypted traffic

good luck

Rate if helpful

New Member

Re: ASA VPN client question

Thank you. I think that this will solve my problem.

Re: ASA VPN client question

cool

please, Rate if helpful

109
Views
0
Helpful
3
Replies